WHAT IT IS: A closed cell expanded vinyl-nitrile foam in the form of a mat, one side smooth for applying an adhesive . Properly applied, It is very durable. Effective to over 225 F.
PURPOSE: Used as a hoodliner for soundproofing the engine compartments of cars and trucks, it is also useful for boats, (won't absorb moisture) and RV's and their generator compartments.
INSTALLATION: For auto/truck hoods, remove the hood, (mark your mountings), remove/discard all the old insulation. Clean the metal and trim to fit, then apply the adhesive to both material and hood. Install and press down well. If mechanical fasteners were used on the original material, reuse them if possible. It won't hurt to use some sheet metal screws, large area washers or upholstery snaps to help retain the mat. Trimming can be done with an electric knife. foam sheet is also useful for reducing "rumble" transmitted from the trunk to the passenger compartment.
SIZE: It is 1" thick. It comes as a 36" X 48" panel and is shipped by post or UPS in a roll.
ADDITIONAL ITEMS REQUIRED: 1 QT. can of contact cement (available at your local hardware store)..
You can use any thickness of "foam sheet" and stick it together with contact cement if the above thickness is not right for your project.
For assistance, please call us at (760) 571-5005.
To go to our online store, click here.